flathead ignition

1-317-618-1814

‚Äč

5237 FORD STreet speedway IN 46224 us

New for 2017 we only sell the complete unit with matching ignition coil, contact points, condensor and ballast resistor. The importance of a "balanced " system is maintained using the correct ignition coil, ballast resistor, primary feed lead and correct matched ignition points and condensor. This is the most trouble free ignition system ever designed !!!

WE BUILD THESE TO ORDER AND SHIP AS FAST AS WE CAN , PLEASE BE PATIENT.

Select HP on heading above  on how to order.....

DISTRIBUTOR MOUNTING TAB IS INSTALLED FOR FACTORY STYLE MOUNTING. MOUNTS JUST LIKE FACTORY HOLD DOWN. 

POINT PLATE IS INSTALLED AND ADVANCE IS LOCKED INTO POSITION.


NEW CONTACTS AND CONDENSOR IS INSTALLED WITH LUBE ON CONTACT ARM FOR LONG LIFE.

WE USE THE BEST CONTACTS $$$$ AVAILABLE WITH THE NAPA CS786 AND RR175 CONDENSOR!!  OVER THE YEARS WE HAVE LEARNED THAT CHEAP POINTS JUST DONT WORK FOR US OR YOU THE END USER.//. 

New drive gear is installed , shaft drilled and new drive pin installed, shaft extension will fit ALL covers with and without lower support!  Contact points are adjusted to 30-32 degrees of dwell running and advance weights are installed with one light and one heavy spring to allow advance to come in at 2500 rpm. Unit is then ran on machine for a few minutes at 6000 rpm and retested for proper operation......